General Information
This scale is certified as an NTEP class IIII weighing device.
Data Interface: 20mA current loop.
Batteries: Operates on 6 1.2 volt nicads (standard), or alkalines.
Battery Life: Approximately 5 years.
(1500 charge/discharge cycles)
Battery duration between charges: Approximately 8 hours of continuous
use before the scale shuts itself off. (These numbers are lowered by the use
of the lamps or active current loop transmission.)
Charging Voltage: 11.5 volts-14.5 volts DC. Protection is provided
for accidental reversal of the charging connections.
Charging Current: Starts at 300mA and drops down to 50mA after 8
hours.
Charging Time: 8 hours if the batteries are discharged to the point
of turning off the scale.
Scale Weight: 37 lb/16.8kg
All metal case provides EMI/RFI immunity.
Accuracy: +/-1% (2% rollover).
Options
- Ramps
- Interconnect cables for totalizing and
printing weights.
- Weigh pads (less indicator) for tying
into remote indicator.
- 20mA current loop output.
- 220 volt 50Hz battery charger.
- 2, 4 or 6 weigh pad carrying cases.
- Dummy weigh pads for leveling.
- Printers for printouts of wheel, axle,
axle group, gross weight, time and date, etc.
Specifications
Ambient:
Humidity: 10 to 95% Non-Condensing.
Temperature:
Operating -28 C to 65 C | -20 F to 150 F
Storage -40 C to 75 C | -40 C to 170 F
EMI/RFI: Meets Mil Spec 461
Physical:
Overall Size: 3 x 16 x 20 inches/76 x 406 x 508 mm
Platform: 12 x 12 inches/305 x 305 mm.
Weight: 37 lb/16.8kg
Case: Heat treated Aluminum
Electrical:
Voltage: Self-contained nickel cadmium batteries
(standard) or alkalines.
Integral recharger to change or operate from a 12, 110 or 220
volt power source.
Outputs:
Axle Totalizing: Transmits weight to another scale for totalizing
individual axles. Will totalize axles, tandem axles or wheel group.
Printers: 20mA current loop to interface with a remote printer or
remote display.
Controls:
General: All controls are located on a waterproof membrane keypad
with large contact surfaces.
Print: When activated, outputs weight local.
On/Off: Two separate switches for unambiguous operation.
Zero/Test: Pushbutton zero checks for motion to HB-44. Test performs
internal test.
Hold/Release: Hold places scale in automatic capture mode for
in-motion weighing. Release places scale in "normal" static weighing mode.
Lamp: Momentary action to activate high efficiency light emitting
diodes for night usage.
lb/kg: Sets units of measure.
Local/Total: Local is the standard mode for weighing. Total mode
enables the scales to accumulate weights.
Indicators:
Total: Accumulative mode of weighing
Battery: Low battery
Hold: In-motion weighing mode
lb: Unit of measure
kg: Unit of measure
Filtering:
Analog: Pi filter
Digital: Average of several internal weights gives steady readings
for unstable loads.
Auto-Zero: Satisfies all HB-44 requirements.
Performance:
Speed: 950 milliseconds to typical reading (static).
Accuracy: +/- 1% of reading static mode. +/-1% of reading hold mode.
Calibration: Keypad calibration.
Units: lb, kg selectable.
| Capacities |
Graduations
|
| 20,000 lb/10,000kg |
10,20,50,100 lb/5,10,20,50kg |
| 10,000 lb/5,000kg |
5,10,20,50 lb/2,5,10,20kg |
| 5,000 lb/2,000kg |
5 lb/2kg |
| |
1 lb/.5kg |
Other capacities and graduation sizes available.
Safe Overload: 150% of capacity
PT300 Wheel Load Scales
| Part # |
Description |
Capacity/Graduation |
Weight |
| 100135 |
Digital Wheel Load Scale System |
2-20K-40,000 x 100 lb/ 20,000 x 50 kg |
110 lb/ 50 kg |
| 100136 |
Digital Wheel Load Scale System |
2-20K-40,000 x 50 lb/ 20,000 x 20 kg |
110 lb/ 50 kg |
| 100137 |
Digital Wheel Load Scale System |
2-20K-40,000 x 20 lb/ 20,000 x 10 kg |
110 lb/ 50 kg |
| 100138 |
Digital Wheel Load Scale System |
2-20K-40,000 x 10 lb/ 20,000 x 5 kg |
110 lb/ 50 kg |
| 100139 |
Digital Wheel Load Scale System |
2-10K-20,000 x 5 lb/ 10,000 x 2 kg |
110 lb/ 50 kg |
| 100140 |
Digital Wheel Load Scale System |
2-5K-10,000 x 5 lb/ 5,000 x 2 kg |
110 lb/ 50 kg |
|
100135-RF |
Wireless Wheel Load Scale w/ Handheld Computer |
2-20K-40,000 x 100 lb/ 20,000 x 50 kg |
110 lb/ 50 kg |
| 100136-RF |
Wireless Wheel Load Scale w/ Handheld Computer |
2-20K-40,000 x 50 lb/ 20,000 x 20 kg |
110 lb/ 50 kg |
| 100137-RF |
Wireless Wheel Load Scale w/ Handheld Computer |
2-20K-40,000 x 20 lb/ 20,000 x 10 kg |
110 lb/ 50 kg |
| 100138-RF |
Wireless Wheel Load Scale w/ Handheld Computer |
2-20K-40,000 x 10 lb/ 20,000 x 5 kg |
110 lb/ 50 kg |
| 100139-RF |
Wireless Wheel Load Scale w/ Handheld Computer |
2-10K-20,000 x 5 lb/ 10,000 x 2 kg |
110 lb/ 50 kg |
| 100140-RF |
Wireless Wheel Load Scale w/ Handheld Computer |
2-5K-10,000 x 5 lb/ 5,000 x 2 kg |
110 lb/ 50 kg |
| 100XXX-RFE |
For European Market |
|
|
Options
| Part # |
Description |
Weight |
| 100492 |
Specify with scale order. 2 scale universal charger (100-240VAC),
with 4 adapter plugs |
2 lb/ 0.9 kg |
| 100493 |
Specify with scale order. 4 scale universal charger (100-240VAC),
with 4 adapter plugs |
3 lb/ 1.4 kg |
| 100494 |
Specify with scale order. 6 scale universal charger (100-240VAC),
with 4 adapter plugs |
4 lb/ 1.8 kg |
| 101017 |
Cigarette lighter adapter for all chargers |
1 lb/ 1.8 kg |
| 100480 |
1 scale universal charger (100-240VAC), comes with 4 international adapter
plugs |
2 lb/ 0.9 kg |
| 260013 |
120V/60 Hz charging transformer (DC output) |
1 lb/ 0.4 kg |
|
260015 |
220V/60 Hz charging transformer (DC output) |
1 lb/ 0.4 kg |
| 100047 |
PT300 2 scale carrying case |
30 lb/ 13 kg |
| 100048 |
PT300 4 scale carrying case |
40 lb/ 18 kg |
| 100049 |
PT300 6 scale carrying case |
60 lb/ 27 kg |
| 100050 |
PT300DW 2 scale carrying case |
40 lb/ 18 kg |
| 100051 |
PT300DW 4 scale carrying case (Custom order) |
60 lb/ 27 kg |
| 100052 |
PT300DW 6 scale carrying case (Custom order) |
90 lb/ 40 kg |
| 100537 |
Cable to printer of display (15 ft.) |
1 lb/ 0.4 kg |
| 100538 |
Cable to single scale (15 ft.) |
1 lb/ 0.4 kg |
| 100488 |
Interconnecting cable and connectors for 2 scales (15 ft.) |
2 lb/ 0.9 kg |
| 100489 |
Interconnecting cable and connectors for 4 scales (15, 25, 15 ft. spacing) |
3 lb/ 1.4 kg |
| 100490 |
Interconnecting cable and connectors for 6 scales (15, 25, 15 ,25, 15 ft.
spacing) |
4 lb/ 1.8 kg |
| 100541 |
Interconnecting cable for 2 scales and PT20 CPU |
3 lb/ 1.4 kg |
| 100526 |
Additional cable for printer, display or scale if more than standard is
necessary |
|
|
100088 |
PT300 dummy pad (cast aluminum replica) |
30 lb/ 13 kg |
| 100070 |
PT300 ramp (fabricated aluminum) |
5 lb/ 2.3 kg |
| 100072 |
PT300DW ramp |
10 lb/ 4.5 kg |
| 100090 |
P-DP battery operated tape printer (prints weight only) |
5 lb/ 2.3 kg |
| 100540 |
PT20 axle weigher CPU with cabling |
20 lb/ 9 kg |
| 100496 |
Interconnecting/charging cable 2 scales 120V |
3 lb/ 1.4 kg |
| 100498 |
Interconnecting/charging cable 4 scales 120V |
4 lb/ 1.8 kg |
| 100500 |
Interconnecting/charging cable 6 scales 120V |
5 lb/ 2.3 kg |
| 100085 |
2 channel indicator with charger and 20 foot cables |
15 lb/ 6.8 kg |
| 100086 |
4 channel indicator with charger and 20 foot cables |
20 lb/ 9 kg |
| 100087 |
6 channel indicator with charger and 20 foot cables |
25 lb/ 11 kg |
| 100796 |
2 scales, totalizing to computer, demand output, 9 pin D-sub |
1 lb/ 0.4 kg |
| 100797 |
2 scales, totalizing to computer, continuous output, 9 pin D-sub |
1 lb/ 0.4 kg |
| 330010 |
Battery pack for PT300 and PT300DW |
1 lb/ 0.4 kg |
| 160212 |
Software VMS with notebook PC for PT300 series |
1 lb/ 0.4 kg |
| 100856 |
Charger, external, 120/220 Volt, 6x6 Nicad battery packs NiMH |
4 lb/ 1.8 kg |
| 101062 |
1 scale PT/LP cigarette adapter charger |
2 lb/ 0.9 kg |
| 101063 |
2 scale PT/LP cigarette adapter charger |
2 lb/ 0.9 kg |
| 101064 |
4 scale PT/LP cigarette adapter charger |
3 lb/ 1.4 kg |
| 101065 |
6 scale PT/LP cigarette adapter charger |
4 lb/ 1.8 kg |
| 140609 |
Vehicle weigh software for RF PDA |
1 lb/ 0.4 kg |
| 140619 |
PDA w/868 MHz RF host node |
2 lb/ 0.9 kg |
| 140620 |
PDA w/900 MHz RF host node |
2 lb/ 0.9 kg |
| 140625 |
PDA w/900 MHz & vehicle weigh software |
2 lb/ 0.9 kg |
| 140626 |
PDA w/868 MHz & vehicle weigh software |
2 lb/ 0.9 kg |
| 140633 |
PDA w/2.4 GHz & vehicle weigh software |
2 lb/ 0.9 kg |
| 140631 |
Vehicle weigh software for RF notebook |
1 lb/ 0.4 kg |
| 140607 |
Wireless node 868 MHz USB host radio for notebook |
1 lb/ 0.4 kg |
| 140606 |
Wireless node 900 MHz USB host radio for notebook |
1 lb/ 0.4 kg |
| 140600 |
Wireless 900 MHz RF host node-6pin for PT20 CPU |
1 lb/ 0.4 kg |
| 140603 |
Wireless 868 MHz RF host node-6pin for PT20 CPU |
1 lb/ 0.4 kg |
